Servo Yarn Package Feeder
Servo Bobbin Feeder
Thanks to the smart systems on it, it provides feeding to the twisting machine with the most accurate tension adjustment even for the most sensitive yarns.
| Maximum Speed | Up to 200 meter/minute |
| Tension Range | 20 – 400 cN |
| Feeding Bobbin Weight | Up to 6 kg (13lbs) |
| Bobbin Holders | Adjustable by threaded shaft holder |
| Yarn Break Sensors | Magnetic electronic |
| Automatic Stop | Yarn break, emergency |
Pre Twisting Machine
PreTwist-C
It allows S and Z twisting of your yarns to be complete in a single operation. PreTwist units can be up to 7 heads. It helps you to perform the S+Z operation you request as quickly as possible.
| Twisting Range | 3 – 2.000 twist/meters |
| Total twisted yarn thickness | 100 Nm – 0.9 Nm (90 denier – 10.000 denier) |
| Take-up winding method | Through a DirecTwist series |
| Yarn Break Sensors | Optical sensors for each position |
| Supply bobbin size | Any size |
| Automatic stop | Yarn Break, emergency |
Yarn Creel
External Creel
External Creel allows multiple bobbins to work with the DirecTwist machine. It automatically stops the machine when yarn breaks. Yarn tension can be adjusted with tension discs. They are conventional creel systems designed to achieve optimum efficiency.
| Number of supply bobbin positions | 4 – 100 |
| Supply bobbin size | Any size |
| Yarn break sensors | Mechanical yarn break sensors |
| Tension | Weight-disc tensioners for each bobbin |
| Yarn feeding positions | Left or right possible. Direction can be adjustable according to the order |
Fine Wire Creel
Magnetic Creel
It is the creel system that adjusts the tension from the bobbin, not the yarn. It is designed for tension of thin metal yarns.
| Feeding Bobbin Weight | Up to 3 kg (11 lbs) |
| Bobbin Holders | Adjustable |
| Bobbin Size | Up to 100 mm diameter, length 170 mm |
| Yarn Break Sensors | Magnetic yarn break sensors |
| Automatic stop | Yarn Break |
Elastane Feeders
Elastane Feeder
Designed to provide Lycra yarns with the most sensitive feeding. You can twist with any yarn by adjusting the feeding rate.
| Maximum Speed | Up to 200 meters/minute |
| Feeding Rate | %10 – %90 |
| Minimum Yarn Thickness | 450 Nm (~20 Denier ) |
Elastane Feeders
Large Elastane Feeder
It is a mobile device that does not require assembly, is used to feed larger elastane bobbins to the twisting machine and works with maximum efficiency.
| Maximum Speed | Up to 200 meters/minute |
| Feeding Rate | %10 – %90 |
| Minimum Yarn Thickness | 450 Nm (~20 Denier ) |
Intelligent Knitted Fabric Unraveling Machine
IntelliWinder®
It enables yarns of flat knitwear to be recovered with the logic of detection and learning with maximum efficiency. It can unravel up to 6, 8, 10 and 12 ends.
| Number of unraveling units | 6 | 8 | 10 | 12 | ||||||
| Winding speed | 0-300 meters/minute (all systems can be adjustable individually) | |||||||||
| Programmable grouping modes | Different grouping methods for different number of ends | |||||||||
| Yarn tension adjustment | Operation panel, ultra-sensitive, precise servo-regulator | |||||||||
| Individual indicators on each system | System cancel, tension, sense, overload, yarn flow rate | |||||||||
| Fabric fixing | By special ball-point needles which allow easy fixing of knit fabrics | |||||||||
| Automatic stop | Yarn breakage, entanglement, bobbin limit, misguided yarns, etc. | |||||||||
Winding Machine
TechnoWinder
You can wind yarns on the any bobbin to double flanged bobbins precisely and quickly
| Maximum Speed | Up to 680 meters/minute |
| Take-up Bobbin size | Up to K160 double-flanged bobbin |
| Feeding bobbin weight | Up to 5 kg (11 lbs) |
| Supply bobbin size | Any size |
| Yarn break sensors | Optical sensors |
| Automatic stop | Yarn break, emergency |
